todas as categorias

Início>Centro de Informações>Saber Mais

Centro de Informações

Peças bimetálicas - Ningbo Investment Casting Co., Ltd

Por Li Chenyu / hcfire360 Julho 2021

If you have any demand of Bi-metallic Parts (Bi-metal Parts), please feel free to contact us by email: sales@nbinvestmentcasting.com.
Bi-metals are one of our key products. We are able to provide wear-resistant bi-metals with different process:
The 1st type is casting, main material for casting under Wear-resistant White Cast Iron Standard ASTM A532 and High Manganese Steel Standard ASTM A12, main parts as below:

High –Chromium Square Hammer

High-Chromium Flat Hammer

Ni-Hard Square Plates

Ni-Hand Ox-Head

Hammer Shank

The 2nd type is the bimetallic composites based on High-chromium cast iron vacuum brazing onto steel backing plate. The welding strength is 320Mpa and the hardness of High-chromium cast iron is 63HRC. The bimetallic composites include many product categories such as chocky bars and blocks, wear buttons, wear bars and blocks and wear plates.

Chocky Bars and Blocks

Wear Bars and Blocks

Cutlery For Sugar Mill

Martelo de alto cromo e ponta de martelo bimetálico

Martelo de alto cromo e ponta de martelo bimetálico

The 3rd type is three layer composites based on tungsten carbide and High-chromium cast iron vacuum brazing onto steel backing plate.

Barras Chocky Soldadas no Liner

Three Layer Carbide Hammer Tips

Soldagem de ferro fundido com alto teor de cromo e carboneto

The 4th type is strengthen wear parts for Mining and Construction like strengthen blade and teeth based on build-up welding, which mainly include WC flux-cored wire and tungsten carbide particles with strict technical data .

Three Layer Liner

Barras de Metal Duro para Soldagem de Acumulação

Soldagem reforçada fortalece os dentes

Build-up welding bar is completely covered by broken carbide

Soldagem de Partículas de Metal Duro Partidas em Objetos de Forma Diferente

The 5th type is strengthen wear parts based on high frequency welding, which high frequency brazing the tungsten carbide on quick wearing position, for agricultural chisel plow sweep, tillage point & Tip and knife blade, etc.

Ponto de preparo agrícola com carboneto de tungstênio soldado

Martelo de quebra de carboneto de tungstênio soldado

WC Flux-Cored Wire Build-up Welded strengthen teeth

The 6th type is cast composites compounded by High-chromium and general cast steel to improve wear resistance and assembly. Pour & solidify a wear resistant material to a structural low alloy or carbon steel box.

Lâmina para pá de neve

Bi-metallic Box

Caixa bimetálica de corte de seção interna

The 7th type is cast composites based on tungsten carbide particles enhancing into High-chromium cast iron to improve wear resistance to a great extent.

Strengthen Carbide Particles and High-chromium Cast Iron Bars

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates

The 8th type is strengthen surface by plasma transferred arc(PTA) overlay welding. The overlay thickness is 3-30mm, hardness could be controlled range from 60-70HRC. No surface crack, no weld bead and flat surface finish.

10+10mm Thickness Ratios

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates