EN
ყველა კატეგორია
EN

მთავარი>ინვესტიციის კასტინგი>ხარისხის კონტროლის

ხარისხის კონტროლის

Investment casting is popular used for manufacturing precision metal parts, every step in the process of metal casting, from pattern-making to heat treating, should be done carefully to avoid problems with the soundness, surface finish, mechanical properties, and final dimensions of the finished casting. Yet even castings made with diligence should undergo inspection for quality control. Some problems can arise unexpectedly, so to guarantee the quality of products, it is necessary to do quality control before delivery. Inspection allows foundry and clients to feel confident they have a quality casting.
We offer a wide variety of in-house investment casting quality verification and product testing services to find casting defects through destructive and non-destructive testing design to provide our customers with the highest quality cast product. No matter where the product is applied, each precision investment castings is inspected and approved before delivery.
Ვიზუალური შემოწმება
Visual Inspection uses the human eye to identify surface defects, cracks, air holes, pin holes, slag or sand inclusions, mis-runs, cold shuts, and shrinkage porosity. And all the inspection result must be documented and stored to record all the products made from our foundry.
განზომილებიანი შემოწმება
Dimensional Inspection is undertaken to ensure a part meets dimensional requirements/tolerances. Although sometimes, the finished product looks perfect after visual inspection, it does not mean they can put into use without doubt. In this case, dimensional inspection is vital to guarantee. This can be done manually by using measuring tools for investment castings such as vernier caliper, depth indicator, dial indicator, ect., and designed testing gauge to do 100% testing for critical dimensions and with a coordinate measuring machine (CMM) that uses probes to get very precise measurements.

ქიმიური შემადგენლობის შემოწმება

ქიმიური შემადგენლობა არის ერთადერთი მახასიათებელი, რომელიც განსაზღვრავს მასალის სპეციფიკას. სპექტრის ანალიზი არის ყველაზე ფართოდ გამოყენებული მეთოდი მასალის ქიმიური შემადგენლობის შესამოწმებლად. მოგეხსენებათ, საინვესტიციო ჩამოსხმა, რომელსაც ასევე უწოდებენ დაკარგული ცვილის ჩამოსხმას, არის მდნარი ფოლადის ჩამოსხმა ნაჭუჭის ნიმუშში სპრეის მეშვეობით. სხვადასხვა ფოლადს აქვს თავისი მახასიათებლები, ამიტომ ელემენტების შემადგენლობის ნებისმიერმა შეცდომამ შეიძლება ბევრი პრობლემა მოუტანოს მომხმარებელს. ჩამოსხმამდე უნდა შევამოწმოთ მასალების ქიმიური შემადგენლობა გამდნარი ფოლადის თითოეული ღუმელისთვის შესაბამისად, სპექტრომეტრის დახმარებით მივიღოთ ზუსტი ტესტის შედეგი, რომელიც ნაჩვენებია თითოეული ელემენტის შემადგენლობაში. ასევე, ტესტირების შედეგით, ჩვენ შეგვიძლია დავრწმუნდეთ, რომ ტესტის შედეგი შეესაბამება მითითებული ფოლადის კლასის სტანდარტულ კომპოზიციებს, შემდეგ მდნარი ფოლადის ეს ღუმელი მიიღება გამოსაყენებლად და ჩანაწერის გაკეთებაზე თითოეული პარტიისთვის.

სპექტრომეტრი

Ningbo Investment Casting Co., Ltd has strictly quality control procedure in material. When ordering raw material from our audited suppliers, material certificate is requested and provided. We will randomly pick some samples to do the chemical composition in-house to have a second confirmation, and then make the labels for each batch. Before production, we will compare the composition of each element by spectrograph, and the recorded result will show if the material is within the range. And after casting or heat treatment process, our testing equipment will help us to confirm if the material composition is changed during the production process. And each batch testing result will be recorded in our laboratory room for future trace. What’s more, we will keep test bars or coupons in-house for 2 years at least.
მექანიკური თვისებების ტესტირება
Mechanical testing is one of the most important parts of any materials testing program. By pushing materials to failure, we can collect data to determine ultimate tensile strength, yield strength, elongation and reduction area rate and hardness and more. To confirm the properties of the investment cast part, Ningbo Investment Casting lab will perform mechanical testing to approve the quality of products. The testing confirms the properties comply per the specified mechanical requirements. Our lab will do below mechanical properties testing to confirm proper investment casting quality. Tests conform to ASTM E8/E8M, E18, E384 and B578.
Tensile Testing-A destructive test process that provides ultimate tensile strength, yield strength, elongation and reduction area rate of the products.

უნივერსალური დაძაბვის ტესტირების მანქანა

Impact Strength-Impact strength is measured by allowing a pendulum to strike a grooved machined test piece and measuring the energy absorbed in the break.
Hardness Testing-Is not an intrinsic property of a material. The values ascribed are due to a complex combination of deformation and elastic behavior. We will do hardness test when there is a hardness requirement on investment castings. სიხისტის ტესტირება result is mostly shown in HB or HRC. Additionally macro and micro hardness testing is available.

სიხისტე ტესტერი

კოროზიის წინააღმდეგობის ტესტები
კოროზიის ტესტები ჩვეულებრივ არ არის საჭირო, გარდა იმ შემთხვევისა, როდესაც საინვესტიციო ჩამოსხმა გამოყენებული იქნება კოროზიული გარემოსთვის ან კოროზიის მდგრადი შენადნობისთვის, როგორიცაა უჟანგავი ფოლადის ჩამოსხმა, ამ შემთხვევაში ტესტები შეიძლება ჩატარდეს საინვესტიციო ჩამოსხმის ნაწილების სხეულზე და ტესტის ზოლებზე (კუპონი). ჩვენი ლაბორატორია ჩვეულებრივ იყენებს სხვადასხვა მარილის სპრეის ექსპოზიციას, რომელთაგან ყველაზე ხშირია ნეიტრალური მარილის შესხურება.
არადესტრუქციული ტესტირება (NDT)
Nondestructive Testing (NDT) is one of the main procedures of quality control in steel casting, and plays an important role in assuring that steel castings will perform well during service. Nondestructive Testing (NDT) technicians perform the necessary tests to locate the indicators and discontinuities that may cause failures or shut downs in such systems. These tests are performed in a manner that does not affect the future usefulness of steel castings. Non-destructive testing is done by our foundry QC person, customers’ QC engineers, and third-party NDT technicians to verify the internal and external soundness of a casting without damaging the casting itself.
 Non-destructive Testing (NDT) Methods Performed on ფოლადის ინვესტიციის ჩამოსხმა
ვიზუალური და ოპტიკური ტესტირება (VT)
ვიზუალური გამოკვლევა შეიძლება იყოს ეფექტური გზა ზედაპირის ნაკლოვანებების ამოცნობისთვის, რამაც შეიძლება უარყოფითად იმოქმედოს ჩვენს ფოლადის ჩამოსხმაზე. ვიზუალური გამომცდელები იყენებენ ცოდნას იმის შესახებ, თუ როგორ იწარმოება ფოლადის ჩამოსხმული ნაწილი, ადამიანის თვალის ფუნქცია, განათების მოთხოვნები და ზუსტი საზომი ხელსაწყოები მასალების შესაფასებლად.
თხევადი საღებავის შეღწევადობის შემოწმება (LPI)
DPI is a testing method used for surface defects of all metal investment castings. In this inspection process, the tester first cleans the casting to remove any particles of grit or dust that may prevent the liquid dye from going into cracks in the metal. Once clean and dry, a dye solution with color is applied to the surface of the castings. The dye, which is suspended in penetrating oil, finds its way into the surface defects. When a special developer is applied, the casting defects become clearly visible. The solution is to detect any cracks or other surface defects due to porosity or gas that produced on the surface. Sometimes it is difficult to find the surface defects by naked eye, such as tiny cracks, pores or other surface defects.

თხევადი საღებავის შეღწევადობის შემოწმება (LPI)

მაგნიტური ნაწილაკების შემოწმება (MPI)
MPI მსგავსია LPI-ს იმით, რომ იგი გამოიყენება საინვესტიციო ჩამოსხმის ზედაპირთან ან ზედაპირულ ზედაპირთან ან მის მახლობლად მცირე ბზარების და ხვრელების მოსაძებნად. ეს მიიღწევა ფერომაგნიტურ მასალაში მაგნიტური ველის ინდუცირებით და გამოკვლეული ლითონის ჩამოსხმის ზედაპირზე რკინის ნაწილაკების გამოყენებით. MPI ტესტირება მოსახერხებელი და ხელმისაწვდომია. ბზარებს და დეფექტებს აქვთ განსხვავებული მაგნიტური თვისებები, ვიდრე მიმდებარე მასალის. მათი არსებობა შეწყვეტს მაგნიტურ ველს, იწვევს დამახინჯებას, რაც მიუთითებს ბზარის ან სიცარიელის ფორმასა და პოზიციაზე.

ულტრაბგერითი ტესტირება (UT)
Ultrasonic Examination finds defects by using high frequency acoustic energy transmitted into a steel casting, to detect discontinuities or locate changes in material characteristics. Sound waves travel through a casting until they hit the opposite surface or an interface or defect. Any barrier reflects the sound waves, which bounce back and are recorded for an analyst to look at. Ultrasonic Testing (UT) in a technology similar to the ultrasounds used by medical technicians.

UT ტესტერი

რენტგენოგრაფიული გამოკვლევა (რენტგენი)
რენტგენოგრაფიული გამოკვლევა გულისხმობს რადიოაქტიური იზოტოპების (გამა სხივები) ან რენტგენის გამოყენებას ფოლადის ჩამოსხმაზე სურათების ან ფილმების შესაქმნელად. მოჩვენებითი გამოსახულებები, რომლებიც წარმოიქმნება რენტგენის სხივების ჩამოსხმის შედეგად, აჩვენებს ბნელ ლაქებს, სადაც არის შეკუმშვის ღრუები, მცირე ნაპრალები და ნაპრალები სითბური ბზარების შედეგად, ან ფოროვანი ღრძილების წერტილები. ეს გამოსახულებები ეხმარება გამოცდილ ლითონის მუშაკს გადაწყვიტოს, არის თუ არა ჩამოსხმის მექანიკური თვისებები შეკუმშვის, ჩანართების ან ხვრელების გამო და შეიძლება თუ არა მათი დაფიქსირება ჩამოსხმის გაგზავნამდე.
After all of the inspections are completed, we will submit all the reports with related photos for our customer approval. Then we’ll arrange the shipment once we got the approval from our customer. If you have any request for ლითონის ჩამოსხმა, please do not hesitate to email Ningbo Investment Casting Co., Ltd for price.