ყველა კატეგორია

მთავარი>საინფორმაციო ცენტრი>გაიგე მეტი

საინფორმაციო ცენტრი

ბიმეტალური ნაწილები - Ningbo Investment Casting Co., Ltd

ავტორი ლი ჩენიუ / hcfire360 ივლისი 2021

If you have any demand of Bi-metallic Parts (Bi-metal Parts), please feel free to contact us by email: sales@nbinvestmentcasting.com.
Bi-metals are one of our key products. We are able to provide wear-resistant bi-metals with different process:
The 1st type is casting, main material for casting under Wear-resistant White Cast Iron Standard ASTM A532 and High Manganese Steel Standard ASTM A12, main parts as below:

High –Chromium Square Hammer

High-Chromium Flat Hammer

Ni-Hard Square Plates

ნი-ხელი ხარ-თავი

Hammer Shank

The 2nd type is the bimetallic composites based on High-chromium cast iron vacuum brazing onto steel backing plate. The welding strength is 320Mpa and the hardness of High-chromium cast iron is 63HRC. The bimetallic composites include many product categories such as chocky bars and blocks, wear buttons, wear bars and blocks and wear plates.

Chocky Bars and Blocks

ატარეთ ბარები და ბლოკები

Cutlery For Sugar Mill

High-Chromium Hammer and Bi-Metallic Hammer Tip

High-Chromium Hammer and Bi-Metallic Hammer Tip

The 3rd type is three layer composites based on tungsten carbide and High-chromium cast iron vacuum brazing onto steel backing plate.

Chocky Bars Welded on Liner

Three Layer Carbide Hammer Tips

High-Chromium Cast Iron and Carbide Welding

The 4th type is strengthen wear parts for Mining and Construction like strengthen blade and teeth based on build-up welding, which mainly include WC flux-cored wire and tungsten carbide particles with strict technical data .

Three Layer Liner

Build-up შედუღების გატეხილი კარბიდის ბარები

შედუღება ამაგრებს კბილებს

Build-up welding bar is completely covered by broken carbide

გატეხილი კარბიდის ნაწილაკების შედუღების დაგროვება სხვადასხვა ფორმის ობიექტებში

The 5th type is strengthen wear parts based on high frequency welding, which high frequency brazing the tungsten carbide on quick wearing position, for agricultural chisel plow sweep, tillage point & Tip and knife blade, etc.

სასოფლო-სამეურნეო დამუშავების წერტილი შედუღებული ვოლფრამის კარბიდით

ჩაქუჩით შედუღებული ვოლფრამის კარბიდი

WC Flux-Cored Wire Build-up Welded strengthen teeth

The 6th type is cast composites compounded by High-chromium and general cast steel to improve wear resistance and assembly. Pour & solidify a wear resistant material to a structural low alloy or carbon steel box.

თოვლის შოველ დანა

Bi-metallic Box

Inner Section Cut Bi-metallic Box

The 7th type is cast composites based on tungsten carbide particles enhancing into High-chromium cast iron to improve wear resistance to a great extent.

კარბიდის ნაწილაკების და მაღალი ქრომის თუჯის ზოლების გაძლიერება

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates

The 8th type is strengthen surface by plasma transferred arc(PTA) overlay welding. The overlay thickness is 3-30mm, hardness could be controlled range from 60-70HRC. No surface crack, no weld bead and flat surface finish.

10+10mm Thickness Ratios

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates