EN
Všechny kategorie
EN

Domů>Informační centrum>Více informací

Informační centrum

Bimetalické díly - Ningbo Investment Casting Co., Ltd

Od Li Chenyu / hcfire360 července 2021

If you have any demand of Bi-metallic Parts (Bi-metal Parts), please feel free to contact us by email: sales@nbinvestmentcasting.com.
 
Bi-metals are one of our key products. We are able to provide wear-resistant bi-metals with different process:
The 1st type is casting, main material for casting under Wear-resistant White Cast Iron Standard ASTM A532 and High Manganese Steel Standard ASTM A12, main parts as below:


High –Chromium Square Hammer

Ploché kladivo s vysokým obsahem chrómu

Ni-Tvrdé čtvercové desky

Ni-ruční volská hlava

Hammer Shank

The 2nd type is the bimetallic composites based on High-chromium cast iron vacuum brazing onto steel backing plate. The welding strength is 320Mpa and the hardness of High-chromium cast iron is 63HRC. The bimetallic composites include many product categories such as chocky bars and blocks, wear buttons, wear bars and blocks and wear plates.


Chocky Bars and Blocks

Nosné tyče a bloky


Příbory pro Cukrovar

Vysoce chromové kladivo a bimetalický hrot kladiva

Vysoce chromové kladivo a bimetalický hrot kladiva


The 3rd type is three layer composites based on tungsten carbide and High-chromium cast iron vacuum brazing onto steel backing plate.


Chocky tyče navařené na vložce

Třívrstvé karbidové kladivové hroty

Svařování litiny a karbidu s vysokým obsahem chromu


The 4th type is strengthen wear parts for Mining and Construction like strengthen blade and teeth based on build-up welding, which mainly include WC flux-cored wire and tungsten carbide particles with strict technical data .


Three Layer Liner

Nahromadění Svařování Zlomené karbidové tyče

Nástavbové svařování Posílení zubů

Build-up welding bar is completely covered by broken carbide

Svařování rozbitých karbidových částic v předmětech různých tvarů


The 5th type is strengthen wear parts based on high frequency welding, which high frequency brazing the tungsten carbide on quick wearing position, for agricultural chisel plow sweep, tillage point & Tip and knife blade, etc.


Zemědělské obdělávací místo se svařeným karbidem wolframu

Svařovaný karbid wolframu kladivem

WC Flux-Cored Wire Build-up Welded zpevnění zubů


The 6th type is cast composites compounded by High-chromium and general cast steel to improve wear resistance and assembly. Pour & solidify a wear resistant material to a structural low alloy or carbon steel box.


Čepel lopaty na sníh

Bi-metallic Box

Vnitřní část řezaná bimetalová krabice


The 7th type is cast composites based on tungsten carbide particles enhancing into High-chromium cast iron to improve wear resistance to a great extent.


Zpevněte karbidové částice a litinové tyče s vysokým obsahem chrómu

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates


The 8th type is strengthen surface by plasma transferred arc(PTA) overlay welding. The overlay thickness is 3-30mm, hardness could be controlled range from 60-70HRC. No surface crack, no weld bead and flat surface finish.


10+10mm Thickness Ratios

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates