EN
جميع الاقسام
EN

الصفحة الرئيسية>مركز المعلومات>إقرأي المزيد

الأجزاء ثنائية المعدن - شركة Ningbo Investment Casting Co.

بواسطة Li Chenyu / hcfire360 يوليو ٢٠٢٠

If you have any demand of Bi-metallic Parts (Bi-metal Parts), please feel free to contact us by email: sales@nbinvestmentcasting.com.
 
Bi-metals are one of our key products. We are able to provide wear-resistant bi-metals with different process:
The 1st type is casting, main material for casting under Wear-resistant White Cast Iron Standard ASTM A532 and High Manganese Steel Standard ASTM A12, main parts as below:


High –Chromium Square Hammer

مطرقة مسطحة عالية الكروم

لوحات نيكل هارد سكوير

Ni-Hand رأس الثور

المطرقة شانك

The 2nd type is the bimetallic composites based on High-chromium cast iron vacuum brazing onto steel backing plate. The welding strength is 320Mpa and the hardness of High-chromium cast iron is 63HRC. The bimetallic composites include many product categories such as chocky bars and blocks, wear buttons, wear bars and blocks and wear plates.


Chocky Bars and Blocks

ارتداء القضبان والكتل


السكاكين لمطحنة السكر

مطرقة عالية الكروم وطرف مطرقة ثنائي المعدن

مطرقة عالية الكروم وطرف مطرقة ثنائي المعدن


The 3rd type is three layer composites based on tungsten carbide and High-chromium cast iron vacuum brazing onto steel backing plate.


قضبان شوكي ملحومة على البطانة

ثلاث طبقات مطرقة كربيد نصائح

لحام الحديد الزهر والكربيد عالي الكروم


The 4th type is strengthen wear parts for Mining and Construction like strengthen blade and teeth based on build-up welding, which mainly include WC flux-cored wire and tungsten carbide particles with strict technical data .


Three Layer Liner

تراكم لحام كربيد قضبان مكسورة

اللحام المتراكم يقوي الأسنان

Build-up welding bar is completely covered by broken carbide

تراكم جزيئات كربيد اللحام في أجسام مختلفة الأشكال


The 5th type is strengthen wear parts based on high frequency welding, which high frequency brazing the tungsten carbide on quick wearing position, for agricultural chisel plow sweep, tillage point & Tip and knife blade, etc.


نقطة الحراثة الزراعية مع كربيد التنجستن الملحوم

كسر مطرقة ملحومة كربيد التنجستن

WC سلك محفور متدفق ملحوم لتقوية الأسنان


The 6th type is cast composites compounded by High-chromium and general cast steel to improve wear resistance and assembly. Pour & solidify a wear resistant material to a structural low alloy or carbon steel box.


شفرة مجرفة الثلج

Bi-metallic Box

المقطع الداخلي قطع مربع ثنائي المعدن


The 7th type is cast composites based on tungsten carbide particles enhancing into High-chromium cast iron to improve wear resistance to a great extent.


تقوية جزيئات الكربيد وقضبان الحديد الزهر عالية الكروم

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates


The 8th type is strengthen surface by plasma transferred arc(PTA) overlay welding. The overlay thickness is 3-30mm, hardness could be controlled range from 60-70HRC. No surface crack, no weld bead and flat surface finish.


10+10mm Thickness Ratios

Strengthen Broken Carbide Particles and High-chromium Cast Iron Wear Plates